Furnace & heating
AC repair
Ductless mini splits
TraneSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Heat Pump Installation Across Temple City
Heat pump installation in Temple City typically runs $3,500 – $7,500 depending on home size, ductwork condition, and whether you need a ducted system or ductless mini splits. Most Temple City installs take one to two days, and we schedule them around your availability, not ours. Our crews know the older ranch homes off Las Tunas Drive, the tract housing near Live Oak Park, and the larger exposed lots along Lower Azusa Road, so we’re prepared for what your specific house throws at us. Call (626) 657-5344 and we’ll give you a written price before anything is ordered.
Here’s what you’re getting with Dalton Heating & Air Pasadena: the price is in writing before we start, every technician is background-checked and uniformed, and the installation is covered by our 365-Day Done Right Promise. If it’s not right, we return and make it right. No fine print. That’s not a special offer; it’s how we operate under The Garrison Standard, and it has been since 2003.
Why Dalton Heating & Air Pasadena Is Temple City’s Preferred Heat Pump Installation Company
Temple City homeowners keep calling us back because we treat a heat pump install like the structural change it is. We don’t sell a box and disappear. Marco Benitez, who runs our team, holds every installation to The Garrison Code: arrive inside the stated window, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. That last part is the one that matters most to people who have been burned by contractors before.
Our Heat Pump Installation team has worked in practically every corner of Temple City, from the 1950s tract homes near Emperor Elementary to the larger parcels up in the unincorporated northeast near Lower Azusa Road. We schedule Temple City jobs with realistic drive times from our Los Angeles dispatch office, and we never book a Temple City install without confirming your specific street access, panel capacity, and duct situation first. You’ll know who is arriving before they show up.
We also service the nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. If you’re replacing a failing Lennox or a 20-year-old Goodman, our techs are factory-trained on both.
Styles & brands we work with
Heat Pump Service in Temple City
Heat Pump Service in Temple City means keeping a system that both heats and cools running year-round, and in our experience, Temple City’s dry inland climate creates a specific failure pattern: blower motors and capacitors wear out faster during those stretches where daytime highs sit in the 90s and the system cycles non-stop. A typical heat pump repair in Temple City runs $150 – $650 depending on the part, and every repair includes a written guarantee. If the repair fails within the guarantee period, we return at no charge. That’s not a verbal promise; it’s in writing.
Diagnostics and written pricing
Every heat pump service call starts with a full diagnostic, not a guess. We check refrigerant pressures against the manufacturer’s spec, measure static pressure across the blower, and inspect the reversing valve and defrost board before quoting anything. The price you approve is the price you pay, in writing, before work begins. No upcharges at the door.
Repairs and system recovery
When a Temple City heat pump fails in the middle of a July heat wave, we treat it as urgent. Our live phone support is staffed by a real person 24/7, and we get a technician dispatched to Temple City the same day in most cases. If the outdoor unit’s high-pressure switch trips repeatedly, that’s often a sign of an oversized install or poor clearance, and we fix the root cause rather than resetting the switch and hoping.
Heat Pump Replacement in Temple City
Heat Pump Replacement in Temple City usually costs $3,500 – $7,500 for a complete swap, and most of the variance comes down to whether your existing ductwork can stay. In Temple City’s 1950s and 60s ranches, the answer is often no, the original ducts were sized for a wall furnace or gravity heat and have no business pushing the airflow a modern heat pump needs. When that’s the case, a ductless mini split system is often the smarter replacement than trying to force air down undersized galvanized runs.
Full system replacement
A full system replacement means removing the old indoor and outdoor units, replacing the lineset, and installing a correctly sized heat pump with a matched air handler or furnace coil. We use a manual J load calculation on every Temple City replacement, accounting for your home’s orientation, window count, insulation level, and whether the lot is sheltered or exposed. No guesswork, no rule-of-thumb sizing.
Ductless conversion
For Temple City homes with no existing ducts, or ducts that are too small, a ductless multi-zone heat pump is often the right call. We’ve installed this configuration in several Temple City ranches where the original wall furnace still sits in the hallway and the return air is just a hole in the closet door. Three or four indoor heads can condition the whole house without tearing out a single ceiling.
Trusted Brands We Service in Temple City
Dalton Heating & Air Pasadena is factory-trained on Carrier, Trane, Lennox, and Goodman heat pumps, and we stock common parts for these brands at our Los Angeles dispatch hub so Temple City repairs don’t wait on cross-country shipping. If a Trane XV19 or a Carrier Infinity is on your radar, our installation team is certified to size and register each one for the full manufacturer warranty. We won’t push one brand over another; we’ll match the equipment to your house and your budget, and tell you plainly when a lower-cost Goodman will do the job just as well as a premium Carrier for a smaller Temple City ranch.
See the difference
Before
After
Before
After
Before
AfterCommon Heat Pump Installation Problems We See in Temple City Homes
- Oversizing from skipped load calculations. A shady 1950s ranch on a tree-lined Temple City street doesn’t bake in the same sun as an exposed lot off Lower Azusa Road, but a tech in a hurry won’t know the difference. An oversized heat pump short-cycles, fails to dehumidify, and murders its own compressor. We run a manual J load calculation on every single install.
- Outdoor unit crammed into a narrow stucco side yard. Temple City’s tract homes were built with tight side setbacks. When a condenser sits between two stucco walls, reflected heat can push ambient temperatures past design conditions and trip the high-pressure switch on the worst summer days. We measure clearance and airflow before we ever set a pad.
- Abandoned gravity furnace flue pulling conditioned air out. Many Temple City ranches still have the original gravity furnace chase running up through the attic. If we convert to a heat pump and leave that flue open, conditioned air gets pulled into the attic and the system’s real-world efficiency tanks. We seal or properly repurpose that chase on every conversion.
- Undersized return air causing static pressure problems. When a home still has that hole-in-the-closet-door return, the blower motor has to work too hard to pull air in. High static pressure kills blower motors and reduces airflow. On Temple City retrofits, we address return air sizing or install ductless heads that don’t rely on the old return at all.
Pricing for Heat Pump Installation in Temple City, CA
A straightforward heat pump replacement in Temple City runs $3,500 – $7,500. The low end covers a single-stage heat pump swap when your existing ducts and electrical are already adequate. The high end covers variable-speed equipment, ductless multi-zone configurations, new electrical circuits, or duct modifications in older Temple City homes. What moves the number most in Temple City is the age of the house and whether the original ducts can stay. We give you a written fixed price before any work begins, and that price does not change unless you change the scope. Same-day installation is not something we promise; proper heat pump installs require a load calculation, equipment ordering, and a scheduled install date. But we will give you an exact date up front. Call (626) 657-5344 for a free in-home estimate.
We Also Serve Cities Near Temple City
Dalton Heating & Air Pasadena serves Temple City and the surrounding San Gabriel Valley communities including El Monte, San Gabriel, Arcadia, and Rosemead. If you’re in one of these nearby cities and need a heat pump installed or repaired, the same written pricing and 365-Day Done Right Promise apply. Read more about our local coverage on our Temple City page.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Temple City
Yes, and in most cases it’s the cheapest path off propane. A ductless multi-zone heat pump runs entirely on electricity, so there are no new gas lines to run and no propane tank to fill. We sized a Daikin FIT heat pump for a 1962 ranch on Arden Drive near the old dairy land with this exact setup. The homeowner had a propane wall furnace and no ducts, so we ran a multi-zone mini split system with three indoor heads, one for the living room where the original gravity heater sat, one for the primary bedroom, and one for the converted garage workshop. Static pressure readings after installation confirmed the blower motor wasn’t overworking, and the condenser coil’s location behind a fence still gets full airflow despite the open lot’s wind exposure. For homes in the unincorporated pockets along Lower Azusa Road where natural gas was never run, a heat pump is often the only all-electric option that makes financial sense. Call (626) 657-5344 and we’ll do a walkthrough of your specific property.
You can, but not always with a ducted system. That hole-in-the-door return tells us the home was never designed for central air, and the existing ducts are almost certainly undersized for a heat pump’s airflow requirements. Forcing a ducted heat pump onto that setup would drive up static pressure and shorten the blower motor’s life. The cleaner solution for many Temple City ranches like yours is a ductless multi-zone heat pump, which skips the ducts entirely and puts a small wall-mounted unit in each main room. We’ve converted several Temple City homes with this exact layout, including the field vignette described above. Call us at (626) 657-5344 for a free assessment; we’ll tell you honestly whether your ducts can be saved or whether ductless is the smarter money.
We run a full manual J load calculation that accounts for your home’s specific conditions, including that uninsulated attic and crawl space, the stucco walls, the window count and orientation, and whether your lot is sheltered by neighboring homes or exposed to the open terrain of the San Gabriel Valley. Temple City’s inland valley location means summer highs regularly reach the 90s and occasionally over 100°F, and homes on exposed lots get zero wind shelter, which changes the outdoor unit’s design conditions. Skipping that calculation is exactly how oversized heat pumps end up short-cycling on shady 1950s ranches. We don’t skip it. Call (626) 657-5344 and we’ll size your system properly, not by guessing from the street.
Running constantly during a properly sized heat pump’s peak load is actually normal, it’s designed to run near-continuously at design temperature rather than cycling on and off. But if it’s running constantly and not keeping the house cool, something is wrong. On Temple City tract homes, the most common culprits are an undersized return air, low refrigerant, or an outdoor unit that is starving for airflow because it’s squeezed into a narrow side yard between two stucco walls. Reflected heat from those walls can push temperatures past the unit’s design conditions and trip safety switches. If your system is running non-stop and the house isn’t reaching set point, call (626) 657-5344 and we’ll diagnose it properly.
Sometimes, but you shouldn’t assume yes. The side yards on Temple City’s 1960s ranches are often too narrow for a modern heat pump’s clearance requirements. Heat pumps need adequate airflow on all sides to reject heat efficiently, and a unit wedged between two stucco walls will run hotter and trip the high-pressure switch during summer heat. We measure every proposed location before installation and we’ll tell you if the old spot won’t work for a heat pump, even if it worked for a less-demanding AC-only condenser. Call (626) 657-5344 and we’ll check your specific side yard clearance before quoting.
Ready to get a written price for Heat Pump Installation in Temple City? Call Dalton Heating & Air Pasadena at (626) 657-5344 for a free estimate. A live person answers 24/7, and we’ll schedule a time that fits your day. If you want to replace a propane furnace, convert a 1950s ranch to ductless, or just replace a failing heat pump before summer hits, we’ll give you an honest assessment and a written price before any work begins.
Written by Marco Benitez, Owner at Dalton Heating & Air Pasadena, serving Temple City and the San Gabriel Valley since 2003.