Furnace & heating
AC repair
Ductless mini splits
TraneSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Temple City
When your furnace quits on a cold Temple City night, you need a crew that answers the phone and shows up ready to work. Most furnace repairs in Temple City run $150 – $700, with the final price in writing before we pick up a tool. At Dalton Heating & Air Pasadena, we know the 1950s and 60s ranch homes off Las Tunas Drive and down toward Live Oak Avenue like the back of our hand. Call (626) 657-5344 and you’ll talk to a live person, not a voicemail queue. We dispatch crews from our Los Angeles office directly to Temple City, typically arriving inside the window we state.
Our Furnace Repair team handles everything from failed ignitors to cracked heat exchangers. If your system is dead at midnight, we run emergency calls 24/7 without overtime charges. The price gets written down before work starts, every single time.
Why Dalton Heating & Air Pasadena Is Temple City’s Preferred Furnace Repair Company
Temple City homeowners call us because we show up when we say we will, put the price in writing before touching the unit, and stand behind every repair for a full year. That’s The Garrison Standard, and it’s been our operating rule since 2003. No exceptions, no fine print, no “well, actually” when the bill comes.
Our technicians are background-checked, uniformed, and factory-trained to service Carrier, Trane, Lennox, and Goodman furnaces, among others. When you book a call, you know who’s coming and what they’ll do before they ring your doorbell. Reviews from Temple City customers consistently mention two things: we arrive on time, and the price on the estimate matches the price on the invoice. That’s not luck. That’s discipline.
We’re a Garrison Partners company, and every one of our crews operates under The Garrison Code: arrive inside the stated window, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for 365 days. If a repair fails within that year, we return at no charge. That’s the Done Right Promise, not a marketing slogan.
Styles & brands we work with
Emergency Furnace Repair in Temple City
Emergency Furnace Repair in Temple City is a 24-hour service, because a dead furnace on a January night when temperatures dip near freezing is a health risk, not an inconvenience. We run no-heat calls day and night, weekends included, and we don’t charge overtime just because the calendar says Saturday. Most Temple City emergency furnace repairs run $150 – $700, depending on the part. The worst thing you can do is nothing; a failed blower motor or a tripping limit switch rarely fixes itself.
No-Heat Calls, Nights and Weekends
Temple City’s older ranch homes often push their furnaces hard on the rare cold snap, and that’s when a weak capacitor or a clogged flame sensor shows itself. Our emergency dispatch handles no-heat calls across Temple City, from the east side near Rosemead Boulevard to the neighborhoods bordering Arcadia. A live person answers the phone at 2 a.m. and schedules a crew that same night.
Fast Diagnosis, Written Price
When our tech arrives, the first step is a systematic diagnosis: checking the ignitor, gas valve, flame sensor, blower capacitor, and heat exchanger for cracks. Then you get a written price for the repair before we begin. No open-ended hourly billing, no “we’ll see how it goes.” You approve the number, then we fix it.
Furnace Maintenance in Temple City
Furnace Maintenance in Temple City is the cheapest insurance you can buy for an aging system, typically $80 – $200 for a full tune-up. Given that most Temple City homes were built between 1950 and 1980, many furnaces are twenty-plus years old and running on borrowed time. A maintenance visit catches a cracked heat exchanger before it becomes a carbon monoxide problem, and catches a failing capacitor before it becomes a midnight no-heat call.
What a Tune-Up Covers
Our maintenance visit includes checking and cleaning the flame sensor, testing the ignitor, inspecting the heat exchanger for cracks, measuring gas pressure, testing the capacitor, and cleaning the blower assembly. You get a written report of what we found, with photos, and an honest recommendation on whether anything needs attention now or can wait. Our technicians are not paid on what they sell. They’re paid to do the work correctly and tell you the truth.
Why Annual Maintenance Matters More Here
Temple City’s dry, smoggy air does not treat HVAC equipment kindly. Dust and particulate matter build up on blower wheels and burners faster than in coastal communities. For homes with add-on AC systems and undersized return air, regular maintenance is even more critical because the blower motor works harder every year. A $120 tune-up today prevents a $600 blower motor replacement in February.
Trusted Brands We Service in Temple City
Our technicians are factory-trained to service nine major residential HVAC brands, including Carrier, Trane, Lennox, and Goodman, so the furnace in your Temple City home is almost certainly one we know well. We keep common replacement parts stocked locally for Temple City customers, which means faster turnaround on ignitors, capacitors, flame sensors, and gas valves. If your Trane furnace on Sultana Avenue needs a new control board, we’re not waiting a week for the part to ship.
Common Furnace Repair Problems We See in Temple City Homes
Temple City’s housing stock creates a specific set of furnace failures that you won’t see in newer developments. Here’s what our techs encounter week after week:
- Heat exchangers cracked early because a clogged bypass filter overheated the furnace. When the original wall-heater return was never enlarged, airflow suffers and metal fatigue sets in before its time.
- Blower motors overheating after someone upsized the AC condenser without a load calculation. The bigger coil demands more airflow through 1970s galvanized ducts, and the blower pays the price.
- Furnace short-cycling due to a weak capacitor that tests fine in mild weather but fails on the first warm afternoon when the condenser coil needs full airflow.
- Tripped breakers and limit switches caused by add-on AC systems pushing original ductwork past its static pressure limit. We see this most often off the older east-side streets where original wall heaters are still in the hallway.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Temple City, CA
Here’s what furnace work costs in Temple City. These are fixed ranges we use on every estimate, so you can budget before booking.
| Service | Typical Cost in Temple City |
|---|---|
| Furnace Repair | $150 – $700 |
| Capacitor Replacement | $150 – $650 |
| Heat Exchanger Inspection | $150 – $700 |
| Furnace Maintenance | $80 – $200 |
The biggest cost driver is the part itself. A new ignitor runs under $200 installed; a replacement blower motor pushes toward the top of the range. A cracked heat exchanger on an old furnace often means the repair cost rivals replacement, and we’ll tell you straight before you spend a dollar. Estimates are free, and the price you approve is the price you pay.
We Also Serve Cities Near Temple City
Our crews handle furnace repair across the San Gabriel Valley, including El Monte, San Gabriel, Arcadia, and Rosemead. If you’re just outside Temple City, give us a call, we likely cover your block too. Learn more about our Furnace Repair in Temple City page for full service details.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Temple City
Because the original 1960s or 70s ductwork was never sized for the airflow a modern AC condenser demands. The blower motor struggles against high static pressure, draws more amps, and trips the breaker. We often fix this by adding a return-air relief in the hallway, which drops static pressure and lets the furnace run without tripping. Call (626) 657-5344 for a diagnosis; estimates are free.
Yes, and it’s a red flag. That hole in the closet door is a shortcut someone took when adding central AC without redoing the ducts. It means the furnace has been starving for return air for years, which cracks heat exchangers and kills blower motors early. It’s not normal for the system’s health; it’s just common in Temple City’s older tract homes.
It depends on the static pressure test, not the brand name. In most Temple City homes with original galvanized ducts, adding a heat pump without addressing return air and duct leakage just transfers the problem. We measure static pressure before recommending equipment. In many cases, a few targeted duct fixes make the old furnace viable for a heat pump upgrade.
Indirectly, yes. This usually means the blower relay or control board got cooked by years of running the blower at full tilt during long San Gabriel Valley summers. The furnace’s logic board keeps the blower on because it’s not getting a clean signal to shut down. We replace the relay or board, and the furnace stops running. It’s a $150 – $450 repair in Temple City.
Cracked heat exchangers and blower motors worn out from fighting undersized ductwork. On a recent call off Sultana Avenue, our tech found a Trane furnace cycling on high limit because an older add-on AC had pushed the original ducts past their static pressure limit every cooling season. We pulled the blower, checked the capacitor and heat exchanger, and added a return-air relief in the hallway to drop static pressure. The furnace stopped tripping, and the homeowner stopped resetting the breaker twice a week. That’s the repair we do most often in this part of Temple City.
Temple City Furnace Repair You Can Count On
If your furnace is acting up, don’t wait until the next cold snap makes it worse. Call Dalton Heating & Air Pasadena at (626) 657-5344 for a free estimate and a written price before any work begins. Our crews know Temple City’s houses, ducts, and furnaces, and we stand behind every repair for a full year. That’s The Garrison Standard, and it’s non-negotiable.
Written by Marco Benitez, Owner at Dalton Heating & Air Pasadena, serving Temple City and the San Gabriel Valley since 2003.