Furnace & heating
AC repair
Ductless mini splits
TraneSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Maywood
Most furnace repairs in Maywood run $150 – $700, and our crews are out here every week handling everything from failing ignitors in 1940s duplexes to rooftop units that gave out on the coldest night of the year. We know Maywood’s housing stock: the small lots, the tight closet installations, the flat roofs that bake all summer. When your heat goes down, call (626) 657-5344 and a live person answers, day or night. We’ll give you a written price before any work starts and get you on the schedule fast.
Marco Benitez runs our dispatch for Maywood, and he’s the one who makes sure the crew shows up inside the window, with the right parts on the truck. That’s the whole job, and we don’t do it halfway.
Why Dalton Heating & Air Pasadena Is Maywood’s Preferred Furnace Repair Company
Maywood homeowners call us because we understand what the neighborhoods here actually throw at a furnace. We’re not driving in from an hour away with a generic playbook. We know that a no-heat call on a 1950s single-family home off Slauson Avenue usually means a different failure than the same symptom in a subdivided duplex near the Los Angeles River. That local read saves you time and money, because we diagnose the right thing the first visit.
Every repair we do in Maywood carries our written guarantee: the repair is guaranteed in writing for a full year, and if it fails within that window, we return at no charge. That’s not an upgrade you pay for. It’s the same guarantee on every job, from a $150 ignitor to a $700 heat exchanger repair. It’s part of The Garrison Standard, the operating code that’s been in place since 2003.
We also staff live phone support 24/7. Not an answering service that takes a message and hopes someone calls you back. A person picks up, gets your address, and gets a technician headed your way. When your furnace dies at 11 p.m. in January, that’s the difference between one cold night and a week of them.
Styles & brands we work with
Furnace Tune Up in Maywood
Furnace Tune Up in Maywood costs $80 – $200 and is the most effective way to avoid a mid-winter no-heat call. Our techs work through older Maywood furnaces testing gas pressure, checking heat exchanger integrity, cleaning the flame sensor, verifying carbon monoxide levels near the unit, and confirming the blower motor pulls the right static pressure. After the visit you get a written report of what was tested, what’s wearing, and what can wait.
In Maywood’s housing stock, a tune-up almost always surfaces one of two things: a filter so caked with dust from the industrial corridors near the river that airflow is down, or a rollout switch that’s been tripping intermittently because a closet furnace can’t breathe. Catching those in October is a $200 afternoon. Catching them in January is a $700 emergency repair.
Combustion Air Checks on Closet Furnaces
Many Maywood duplexes and older rental units have furnaces jammed into hallway closets or utility nooks that were never designed for a furnace. If vents get covered by tenant storage or someone tightened up the louvered door for looks, the furnace can’t get combustion air. It starts sooting the heat exchanger. That’s when carbon monoxide alarms go off, and it’s why our tune-ups always include a carbon monoxide check, even when the homeowner only asked for a tune-up.
Rooftop Furnace Inspections Before Winter
Flat-roof Maywood homes put rooftop furnaces through brutal conditions. The inland sun beats on them from May through October, cooking capacitors and control boards. A pre-season inspection catches a capacitor that’s losing microfarads before it fails, and swapping it costs a fraction of an emergency call. We’ll walk the roof, check the unit’s electrical health, and tell you if that furnace’s control board is nearing the end of its practical life.
Emergency Furnace Repair in Maywood
Emergency Furnace Repair in Maywood runs $150 – $700 and we treat every no-heat call as an emergency when the temperature drops, because a cold house is a health issue for older residents and families with children. Same-day dispatch to Maywood is standard for us, not an occasional favor. When you call, we tell you the technician’s name before he arrives, and we give you a written price for the repair before he touches the furnace.
Many Maywood emergency calls we get aren’t the furnace itself. They’re airflow problems, clogged filters, a dead thermostat, or a rollout switch that’s been tripping because a closet furnace is starved for air. That doesn’t change the urgency. It means the fix might be a $120 part instead of a $700 blower motor. Either way, the price goes on paper before the work, and you approve it.
When the Furnace Fails at Night
Our 24/7 live dispatch means Maywood doesn’t wait until morning. A person answers, asks a few questions about the symptom, and sends a technician who knows the streets and the housing types here. If you have a rooftop furnace and the ladder access is locked, we’ll tell you to have the key ready so the tech isn’t standing in the cold unlocking gates at midnight while your family shivers. Small stuff like that matters when it’s 38 degrees outside.
No Second-Trip Charges for Misdiagnosis
If we diagnose a gas valve and it turns out the actual failure was a flame sensor or a pressure switch, the second trip is on us. That’s the Garrison Code in writing: do the job by the book, stand behind it for a full year, and don’t charge you for our miss. You won’t find a second-trip charge on a Dalton invoice. It doesn’t exist.
Trusted Brands We Service in Maywood
We’re factory-trained on Carrier, Trane, Lennox, and Goodman furnaces, which covers the bulk of what’s installed in Maywood homes built between 1920 and 1980. Our trucks carry common parts for these systems: ignitors, flame sensors, pressure switches, gas valves, and capacitors. For Maywood specifically, that matters, because a rooftop Goodman installed twenty years ago shares almost no parts with a closet-hung Carrier, and stocking both makes same-day repair a reality instead of a two-visit ordeal.
Common Furnace Repair Problems We See in Maywood Homes
- Rooftop furnaces on flat roofs suffering control board and capacitor failures. The inland sun bakes these units for months at a time. Components that would last fifteen years in a shaded coastal installation often fail in eight to ten here, and the symptom looks exactly like a bad gas valve to an inexperienced tech.
- Closet furnaces in subdivided duplexes lacking combustion air. Vents get covered, tenant storage piles against the unit, and the heat exchanger starts sooting. It trips the rollout switch repeatedly, and repeated manual resets can crack a heat exchanger.
- Flame sensor issues in high-particulate air near the Los Angeles River. Maywood’s air carries more dust than coastal neighborhoods, and it lands on flame sensors. A sensor that can’t read the flame shuts the furnace down after a few minutes of run time, which presents as a furnace that “starts and stops.”
- Exhaust terminations too close to neighbor windows in shared side yards. Maywood’s lots leave almost no clearance between homes. Many furnaces were installed when venting rules were looser, and now their terminations red-tag on inspection. We reroute vents to code when we see it, and we’ll tell you before the city does.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Maywood, CA
Here’s what furnace repair actually costs in Maywood right now, based on the work we do out here every week. A furnace tune-up runs $80 – $200. Emergency furnace repair runs $150 – $700. The spread depends on the part: an ignitor is toward the low end, a blower motor or gas valve toward the high end, and a heat exchanger replacement can land at the top when we’re also dealing with venting corrections. Every quote is in writing before any work begins, and the price doesn’t move when the job gets hard.
| Service | Price Range |
|---|---|
| Furnace Tune Up | $80 – $200 |
| Emergency Furnace Repair | $150 – $700 |
Those are the numbers our Maywood customers see. No diagnostic fee games, no “we’ll see what we find” pricing. You get a written number, you approve it, and we do the job. Call (626) 657-5344 for a free estimate on anything we’ve described above.
Maywood’s Small Lots Change How Furnace Repair Works Here
Maywood’s small lots and tightly packed mid-century homes often force furnace installations into tight closets or rooftop platforms. That changes the repair conversation completely. In a city where single-family homes and duplexes sit shoulder to shoulder, often built between 1920 and 1960 and since subdivided into rentals, access to the heat exchanger or the blower motor is usually the defining constraint. Not part availability. Not brand support. Getting to the part without tearing out a wall or hauling a replacement component up a ladder.
In a 1940s duplex off East 55th Street, our crew traced an intermittent no-heat call to a Carrier 80% furnace with a rusted secondary heat exchanger and a blower motor running 1.2 inches of static pressure – way over the 0.5-inch spec. After a load calculation confirmed the original 60,000 BTU unit was oversized for the now-subdivided floor plan, we replaced the heat exchanger under warranty and corrected the blower speed to drop static pressure to 0.5, cutting the customer’s gas use and ending the rollout switch trips. That’s not a boilerplate repair. That’s knowing how Maywood’s housing stock got to where it is, and fixing the house, not just the furnace.
Rooftop furnaces on Maywood’s flat roofs bake in the inland sun, causing control board and capacitor failures that are mistaken for gas valve issues. We see that call. Closet installations in subdivided duplexes lack combustion air, and vents get buried under tenant storage, leading to sooted heat exchangers and carbon monoxide alarms. We get that one too. Shared side yard setbacks force furnace exhaust terminations too close to neighbor windows, triggering code red-tags that require expensive vent rerouting. That one shows up on everyone’s list except the homeowner’s. We flag it before it red-tags.
This page gives you the exact clearance, access, and air-quality realities your Maywood furnace repair will face, so no one gets surprised by a red-tag or a second-trip charge. That’s the local knowledge that matters, and it’s not something a generic HVAC page can hand you.
We Also Serve Cities Near Maywood
Our Furnace Repair crews cover Maywood and the surrounding communities daily. If you’re in Maywood, Monterey Park, Pico Rivera, Alhambra, or Rosemead, you’re inside our regular service area. Same dispatch, same written pricing, same full-year guarantee. We just happen to know Maywood’s rooftops and closet furnaces better than most.
Serving Maywood, CA - Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Maywood
Because many Maywood furnaces are installed in closet spaces inside subdivided duplexes with poor combustion air, and sooted heat exchangers are common enough that a no-heat call can be the first sign of a carbon monoxide risk. We test CO on every repair visit in Maywood as standard practice. If we find a cracked or sooted heat exchanger, we’ll show you and recommend replacement or repair, and we won’t leave the furnace running if it’s unsafe.
Yes, for the vast majority of repairs. A control board, capacitor, ignitor, flame sensor, or gas valve all swap out by hand on the rooftop. If you ever need a full furnace replacement on a roof in Maywood, we’ll schedule a crane and handle the permitting and coordination, but repairs don’t require that. Call (626) 657-5344 and we’ll tell you honestly whether your specific job needs anything beyond a tech with a ladder.
Often both. In Maywood’s older subdivided units, the closet doesn’t get enough combustion air, so the burner overheats and the rollout switch trips as it should. The furnace is doing its job; the house is starving it. We check combustion air, blower static pressure, and heat exchanger condition together, because resetting the switch without fixing the airflow just causes it to trip again, and repeated trips can damage a heat exchanger. The fix is usually airflow correction, and it’s a lot cheaper than a new furnace.
No, repairs like ignitor replacement, gas valve repair, flame sensor cleaning, or blower motor replacement don’t require a permit in Maywood. Venting corrections or a full furnace replacement typically do, and we handle the permits on those jobs. For repair-only work, you get the written estimate, approval, repair, and the year-long guarantee, no permit paperwork involved.
Maywood’s location in the Los Angeles Basin near industrial corridors means more particulate in the air, and that lands directly on furnace filters, flame sensors, and blowers. It’s why a filter that might last three months in a coastal neighborhood clogs in six to eight weeks here, and why flame sensors in Maywood need cleaning more often. Our tune-ups account for that local reality, not a generic maintenance schedule. We don’t sell you filters you don’t need, but we do tell you when the air here is choking your furnace.
If your furnace is down in Maywood, call (626) 657-5344. You’ll get a live person, a technician who knows the rooftops and closets here, and a written price before the work starts. Marco Benitez and the Dalton Heating & Air Pasadena team have you covered.
Written by Marco Benitez, Owner at Dalton Heating & Air Pasadena, serving Maywood since 2003.